Home > Products > PlateRite 8600SL > Specifications

PlateRite 8600SL


PlateRite 8600SL specifications

Recording system External drum
Light source 64-channel laser diodes
Plate size Maximum 1,150 x 940 mm (45.2" x 37"); Minimum 450 x 370 mm (17.8" x 14.6")*1, *2
Exposure size Maximum 1,150 x 920 mm (45.2" x 36.2"); Minimum 450 x 350 mm (17.8" x 13.8")*2, *3, *4
Media Thermal plates
Media thickness 0.15 to 0.3 mm (6 to 11.8 mil)
Resolutions 1,200*5/2,400/2,438/2,540 dpi
Repeatability ± 5 microns*6
Productivity 22 plates/hr (1,030 x 800 mm/40.5" x 31.4" plates) at 2,400 dpi*7
Interface F-PIF
Plate transport Semiautomatic loading (standard), Fully automatic loading (optional), Rear delivery kit (optional), Processor bridge (optional)
Punch systems SCREEN, Heidelberg, Protocol, Komori, and others*8
Remote monitoring system Valuable management tool
(W x D x H)
Main unit: 2,440 x 1,295 x 1,302 mm (96.1" x 51.0" x 51.3")
Blower unit: 693 x 675 x 550 mm (27.3" x 26.6" x 21.7")
Weight Main unit: 1,150 kg (2,530 lb); Blower unit: 85 kg (187 lb)
Power requirements Main unit: Single phase 220 V to 240 V, 32A, 4 kW (Approved UL, CSA, Declared CE)
(SA-L, MA-L, AT-T, AT-M, and blower unit are powered by main unit.)
Environment Recommended: 21 to 25°C (69.8 to 77°F);
Required: 18 to 26°C (64.4 to 78.8°F); Relative humidity: 40 to 70% (no condensation)
Supported plates See the list (English), See the list (Chinese)

*1 Compatible with 304 x 370 mm (12" x 14.6") plate sizes as a option.
*2 The width of plate is between 570 mm and 624 mm can not be used.
*3 When outputting at 4,000 dpi, confi rm output quality before use.
*4 Only 12-mm leading edge clamps are available. Trailing edge clamps are available in 12-mm and 8-mm sizes. (Productivity is reduced when 8-mm trailing clamps are used.)
*5 Minimum exposure size 304 x 346 mm (12" x 13.7") with option.
*6 Over four consecutive exposures on one plate at 23°C (73.4°F) and 60% relative humidity..
*7 Productivity may vary depending upon media sensitivity.
*8 Required the registration punch option, when press punch installed.

Field upgradeable options

Registration Punch When the registration punch system is installed, the maximum plate size is 1,160 x 940 mm (45.6" x 37")
and the maximum exposure size is 1,160 x 924 mm (45.6" x 36.3").
When installed punch system for presses, the Registration Punch (option) is required.
Punch system for presses SCREEN, Heidelberg, Protocol, Komori, and others*1
Small size support Minimum plate size becomes 304 x 354 mm (12" x 14").
Cleaning roller Registration punch and using together are recommended.
Feed tray unit Easier handling manual plate loading. Processor bridge and using together are recommended.
Autoloader connection kit When installed autoloader, this option is required.
Single-cassette autoloader SA-L8800II; 100 plates per cassette
Multi-cassette autoloader MA-L8800II; Up to 5 cassettes (3 cassettes is standard), 100 plates per cassette
Rear delivery kit When installed processor bridge, rear delivery kit (option) is required.
Processor bridge build-in bridge; Straight discharge
  AT-T8001R; Straight discharge
  AT-M8001; Multi-direction
Signal tower Safety signed signal
Air fi ltering unit AF-180N; Debris removal

*1 Required the registration punch option, when press punch installed.

For more information about our products, sales or technical information, please contact directly to our local offices.
go to pagetop