SGScan-X V1.11E Updater

                                                                                  25/8/2003
 

This program upgrades SGScan-X V1.00 or V1.10 to V1.11.
The modifications included in this program are shown below.
Please update the software after you read the following instructions.

=======================================================
- Modification
=======================================================

  Changes in Version 1.1
Problems and improved items
<Problems in Ver. 1.10 and their corrections in Ver. 1.11>
- Sharpness data
In usual, the optimal sharpness data was selected by setup of magnification.But there was a trouble case when this data is initialized.In this case, the right data is not selected.
It was corrected in this version.

<Problems in Ver. 1.00 and their corrections in Ver. 1.10>
- A-U999 error
The "A-U999: Undefined error." message was occasionally displayed during scanning. Among the causes of these problems, those that reproduced the error have been corrected.

- Macintosh's sleep
If Macintosh went to sleep after setting up and registering scanning conditions, the registered setup information was deleted. This problem has been corrected. Also, the "A-S050: SCSI error." message that was displayed when Macintosh went to sleep has been changed.

- Scan / Register
There was no response when the "Scan / Register" button was clicked after reading the parameter file. This problem has been corrected. Previously, a part of data was not correctly written into the parameter file that was created automatically, and this caused the problem.
Therefore, do not use the parameter files that were created using Version 1.00.

- Required time for scanning
Accuracy of required time for scanning, which is displayed, has been improved.

- Tool selection
With this version, after a new trimming area is designated on a zoom-in prescan image, the tool selected returns to the arrow (selection tool).

- Reading parameter files
A part of the file selection screen, which is displayed when a parameter file is read, was displayed on another screen. This problem has been corrected.
 

=======================================================
- To upgrade SGScan-X from Ver. 1.10 to Ver. 1.11
=======================================================
  Then, using the SGScan-X V1.11E Updater , upgrade Ver. 1.10 to Ver. 1.11
  Double-clicking "SG Scan-X V1.11E Updater", the updater starts.
  Select application which is "SG Scan-X Ver1.10E" .
  The following program/file will be updated.
 

<Install Files>

[V1.10]

SGScan-X Application Folder
    readme.pdf
    SG Scan-X Ver1.10E ->  SG Scan-X Ver1.11E

The upgrade has now been completed.
 

=======================================================
- To upgrade SGScan-X from Ver. 1.00 to Ver. 1.11
=======================================================
  Then, using the SGScan-X V1.11E Updater , upgrade Ver. 1.00 to Ver. 1.11
  Double-clicking "SG Scan-X V1.11E Updater", the updater starts.
  Select application which is "SG Scan-X Ver1.00E" .
  The following program/file will be updated.
 

<Install Files>

[V1.00]

SGScan-X Application Folder
    readme.pdf
    SG Scan-X Ver1.00E ->  SG Scan-X Ver1.11E
    Eve3 Carbon Library (add)
    E3ITF (add)

Mac OS X Volume
    SYSTEM
        Library
            Frameworks
                Eve3.framework (add)
 

The upgrade has now been completed.