SGScan MkII V1.12E Updater

                                                         23/7/2002


This program upgrades SGScan8060P MkII V1.1x to V1.12.
The modifications included in this program are shown below.
Please update the software after you read the following instructions.

=======================================================
- Modification
=======================================================

Modifications of SG Scan8060P MarkIIrkII Ver1.11E
  1) Connecting with IS-210 using deMoire became possible.

  2) The status of deMoire is not changed , if reference data is loaded , when DeMoire is carried.

    At Ver1.10, when the reference data contained in SG Scan8060P MarkII Ver1.10 including factory
    release is called , setting of deMoire isn't changed.
    But , when the reference data that a customer was made newly(It is contained re-saving with
    same name of  factory released reference data )are called, setting deMoire is changed to setting
    when saved the reference data.

  3) Bug that warning of scanning with magnification wasn't changed occured
    "SCSI manager" error is modified.

  4) Bug that changing setup and restarting application , then setup is returned default status
    is modified.

 5) Stability of connecting with "IS-210" is improved.(Especially, Gray mode)

  Modifications of SG Scan8060P MarkII Ver1.12E
  1)  Large size images could not be saved as EPS files (JPEG compression).
       This problem has been corrected.
 2)  The display of the mouse pointer was unstable when using Mac OS 9.1 or higher.
       This problem has been corrected.
  3)  The auto focus processing has been modified to be more stabilized than that of
       the previous version.
 

=======================================================
- To upgrade SGScan MkII from Ver. 1.1X to Ver. 1.12
=======================================================
  Then, using the SGScan MkII V1.12E Updater Updater, upgrade Ver. 1.1x to Ver. 1.12
  Double-clicking "SGScan MkII V1.12E Updater", the updater starts.
  Select application which is "SG Scan8060P MarkII Ver1.1xE" .
  The following program/file will be updated.

<Install Files>

[V1.10]
 SG Scan8060P MarkII Ver1.10E  ->  SG Scan8060P MarkII Ver1.12E
 SG Scan LIB MarkII Ver1.10E  ->  SG Scan LIB MarkII Ver1.12E
 readme
 System --- Error Data --- ErrMsg
 firmware --- SG-8060P MarkII V5.11 -> SG-8060P MarkII V5.20
 retorofit --- Firmware for SG-8060P --- SG-8060P V4.40 -> SG-8060P V4.49

[V1.11]
 SG Scan8060P MarkII Ver1.11E  ->  SG Scan8060P MarkII Ver1.12E
 SG Scan LIB MarkII Ver1.11E  ->  SG Scan LIB MarkII Ver1.12E
 readme
 System --- Error Data --- ErrMsg
 firmware --- SG-8060P MarkII V5.12 -> SG-8060P MarkII V5.20
 retorofit --- Firmware for SG-8060P --- SG-8060P V4.41 -> SG-8060P V4.49

The upgrade has now been completed.