This program upgrades
ColorGeniusEX for FT-S5500 V2.10 or V2.11 or V2.12 to V2.13. The
modifications included in this program are shown below. Please update the
software after you read the following instructions.
Be careful that this program
cannot upgrade ColorGeniusEX for FT-S5500 V2.0x to V2.13.
<Note>
Please use ColorGeniusEX V2.14 only in
Mac OS X 10.6.
ColorGeniusEX
V2.14 doesn't confirm the operation in other OS. Therefore, do not update
ColorGeniusEX to V2.14, please.
<Problems
in Ver. 2.1.3 and their corrections in Ver. 2.1.4>
- Support
Mac OS X 10.6 "Snow Leopard".
<Problems
in Ver. 2.1.2 and their corrections in Ver. 2.1.3>
-
The quality of image for digital cameras has been improved.
*)
But new digital camera's data is not updated in this program. Please download
digital camera new data (V2).
-
TIFF preview of each separation file is selected with "ON" or
"OFF" in Dotfinder mode.
-
The function to embed ICC profile to a tiff image file is performed for each
color mode.
-
How to name the extension of the image processed by the hot holder has been
changed.
-
The problem that was able to quit Server application has been corrected.
-
In Mac OS X, the display of the preview window might not be displayed correctly
after prescanning in the reason why the display is not updated properly. This
problem has been improved.
-
The problem that is not normally canceled in a multi-client environment while
reading out image data with local storage, has been corrected.
-
When ICC profile using in a ColorSync simulation was lost, the problem that a
warning is displayed repeatedly has been corrected.
-
When volume capacity ran short in scanning, the problem that right error
message is not displayed rarely has been corrected.
-
In Scanning, when a folder to save image of PICT or CT image format is lost,
the stability of processing has been improved.
- The output profiles are added. In detail, please refer to "RGB input Manual (FT-S).pdf"
-
Addition
-
5500Adobe(AI)8bit.C5T - 5500Adobe(AI)16bit.C5T
-
5500sRGB (AI)8bit.C5T - 5500sRGB (AI)16bit.C5T
-
When output profile is modified in RGB 16bit mode, its profile is stored in RGB
8bit mode. This problem has been corrected.
-
The stability of following items is improved.
- SCSI I/F
- Saving of TIFF image
-
The SCSI I/F part of firmware was changed for the improvement of
interchangeability with Adaptec Power Domain 29160N SCSI Card.
-
The problem of the maintenance function of FT-S5500 has been corrected. To put
it concretely, the problem that the automatic backup function of FT-S5500's
adjustment parameter was not operated properly has been corrected.
- Under the Mac OS X 9 environment, there was a problem that the recipe file was not able to be displayed in recipe file open dialog. This problem has been corrected.
-
When the server and the client were connected by the TCP IP specification on
the same
Macintosh,
the communication of the server often became abnormal and the communication
time-out error occurred by the client. This problem has been corrected.
-
When the display of the finish key word is turned off, the key word might not
be able to be customized correctly. This problem has been corrected.
Etc.
For
details, please read the document after update.
Then, using
the ColorGeniusEX 2.1.4 Updater, upgrade Ver. 2.1.3 to Ver. 2.1.4.
Double-clicking
"ColorGeniusEXV214E_Up", the updater starts.
Select folder which
"ColorGeniusEX folder" .
The following
program/file will be updated.
[Install
Files]
ColorGeniusEX V2:ColorGeniusEX V2.1:
ColorGeniusEX
Server
Assistant
[System]:ApplicationSupport:SCREEN:DS Drivers
FT-S5500 Driver
ColorGeniusEX:FT-S5500 Maintenance(MacOSX10.5-):
The
upgrade has now been completed.
Then, using
the ColorGeniusEX 2.1.4 Updater, upgrade Ver. 2.1.2 to Ver. 2.1.4 .
Double-clicking
"ColorGeniusEXV214E_Up", the updater starts.
Select folder which
"ColorGeniusEX folder" .
The following
program/file will be updated.
[Install
Files]
ColorGeniusEX V2:
ColorGeniusEX_Update.pdf
Precautions for Mac OS X.pdf
ReadMe(5500).pdf
ReadMe.pdf
ColorGeniusEX V2:ColorGeniusEX V2.1:
ColorGeniusEX
Server
Assistant
[System]:ApplicationSupport:SCREEN:DS Drivers
FT-S5500 Driver
ColorGeniusEX:FT-S5500 Maintenance(MacOSX10.5-):
The
upgrade has now been completed.
Then, using
the ColorGeniusEX 2.1.4 Updater, upgrade Ver. 2.1.0 or Ver.2.1.1 to Ver. 2.1.3
.
Double-clicking
"ColorGeniusEXV214E_Up", the updater starts.
Select folder which
"ColorGeniusEX folder" .
The following
program/file will be updated.
[Install
Files]
ColorGeniusEX V2:
ColorGeniusEX_Update.pdf
Precautions for Mac OS X.pdf
ReadMe(5500).pdf
ReadMe.pdf
RGBInputManual(FTS5500).pdf
ColorGeniusEX V2:FT-S5500 Maintenance(MacOSX)
FT-S5500_V206.sfirm
ColorGeniusEX:FT-S5500 Maintenance(MacOSX10.5-):
ColorGeniusEX V2:ColorGeniusEX V2.1:
ColorGeniusEX
Server
Assistant
ColorGeniusEX V2:ColorGeniusEX V2.1:InputDevice:FT-S5500:Profile
5500Adobe(AI)16bit.C5T
5500Adobe(AI)8bit.C5T
5500sRGB(AI)16bit.C5T
5500sRGB(AI)8bit.C5T
Goodies:CustomData:FT-S5500:
Custom2.ct2
[System]:ApplicationSupport:SCREEN:DS Drivers
FT-S5500 Driver
Download
new firmware "FT-S5500_V206.sfirm" when the firmware version is older
than Ver2.06.
The
upgrade has now been completed.