ColorGeniusEX V2.13 Updater for FT-S5500
                                                                     13/7/2005


This program upgrades ColorGeniusEX for FT-S5500 V2.10 or V2.11 or V2.12 to V2.13.  The modifications included in this program are shown below.  Please update the software after you read the following instructions.
Be careful that this program cannot upgrade ColorGeniusEX for FT-S5500 V2.0x to V2.13.
 

<Problems in Ver. 2.1.2 and their corrections in Ver. 2.1.3>

- The quality of image for digital cameras has been improved.

*) But new digital camera's data is not updated in this program. Please download digital camera new data (V2).
 

- TIFF preview of each separation file is selected with "ON" or "OFF" in Dotfinder mode.

- The function to embed ICC profile to a tiff image file is performed for each color mode.

- How to name the extension of the image processed by the hot holder has been changed.

- The problem that was able to quit Server application has been corrected.

- In Mac OS X, the display of the preview window might not be displayed correctly after prescanning in the reason why the display is not updated properly. This problem has been improved.

- The problem that is not normally canceled in a multi-client environment while reading out image data with local storage, has been corrected.

- When ICC profile using in a ColorSync simulation was lost, the problem that a warning is displayed repeatedly has been corrected.

- When volume capacity ran short in scanning, the problem that right error message is not displayed rarely has been corrected.

- In Scanning, when a folder to save image of PICT or CT image format is lost, the stability of processing has been improved.
 

<Problems in Ver. 2.1.1 and their corrections in Ver. 2.1.2>
- The output profiles are added. In detail, please refer to "RGB input Manual (FT-S).pdf"

- Addition
- 5500Adobe(AI)8bit.C5T    - 5500Adobe(AI)16bit.C5T
- 5500sRGB (AI)8bit.C5T    - 5500sRGB (AI)16bit.C5T

- When output profile is modified in RGB 16bit mode, its profile is stored in RGB 8bit mode. This problem has been corrected.

- The stability of following items is improved.
    - SCSI I/F
    - Saving of TIFF image

- The SCSI I/F part of firmware was changed for the improvement of interchangeability with Adaptec Power Domain 29160N SCSI Card.

- The problem of the maintenance function of FT-S5500 has been corrected. To put it concretely, the problem that the automatic backup function of FT-S5500's adjustment parameter was not operated properly has been corrected.
 

< Problems in Ver. 2.1.0 and their corrections in Ver. 2.1.1 >
- Under the Mac OS X 9 environment, there was a problem that the recipe file was not able to be displayed in recipe file open dialog. This problem has been corrected.

- When the server and the client were connected by the TCP IP specification on the same
 Macintosh, the communication of the server often became abnormal and the communication time-out error occurred by the client. This problem has been corrected.

- When the display of the finish key word is turned off, the key word might not be able to be customized correctly. This problem has been corrected.
 

Etc.

For details, please read the document after update.
 
 
 
 

# Update procedure

=======================================================
- To upgrade ColorGeniusEX from Ver. 2.1.2  to Ver. 2.1.3
=======================================================
  Then, using the ColorGeniusEX 2.1.2 Updater, upgrade Ver. 2.1.2 to Ver. 2.1.3 .
  Double-clicking "ColorGeniusEXV213E_Up", the updater starts.
  Select folder which "ColorGeniusEX folder" .
  The following program/file will be updated.

[Install Files]

   ColorGeniusEX V2:
                        ColorGeniusEX_Update.pdf
                        Precautions for Mac OS X.pdf
                        ReadMe(5500).pdf
                        ReadMe.pdf
   ColorGeniusEX V2:ColorGeniusEX V2.1:
                        ColorGeniusEX
                        Server
                        Assistant
   [System]:ApplicationSupport:SCREEN:DS Drivers
                        FT-S5500 Driver

The upgrade has now been completed.
 

=======================================================
- To upgrade ColorGeniusEX from Ver. 2.1.0 or Ver.2.1.1 to Ver. 2.1.2
=======================================================
  Then, using the ColorGeniusEX 2.1.3 Updater, upgrade Ver. 2.1.0 or Ver.2.1.1 to Ver. 2.1.3 .
  Double-clicking "ColorGeniusEXV213E_Up", the updater starts.
  Select folder which "ColorGeniusEX folder" .
  The following program/file will be updated.

[Install Files]

   ColorGeniusEX V2:
                        ColorGeniusEX_Update.pdf
                        Precautions for Mac OS X.pdf
                        ReadMe(5500).pdf
                        ReadMe.pdf
                        RGBInputManual(FTS5500).pdf
   ColorGeniusEX V2:FT-S5500 Maintenance(MacOS9)
                        FT-S5500_V206.sfirm(*1)
   ColorGeniusEX V2:FT-S5500 Maintenance(MacOSX)
                        FT-S5500_V206.sfirm(*2)
   ColorGeniusEX V2:ColorGeniusEX V2.1:
                        ColorGeniusEX
                        Server
                        Assistant
   ColorGeniusEX V2:ColorGeniusEX V2.1:InputDevice:FT-S5500:Profile
                        5500Adobe(AI)16bit.C5T
                        5500Adobe(AI)8bit.C5T
                        5500sRGB(AI)16bit.C5T
                        5500sRGB(AI)8bit.C5T
   Goodies:CustomData:FT-S5500:
                        Custom2.ct2
   [System]:ApplicationSupport:SCREEN:DS Drivers
                        FT-S5500 Driver
   [System]:DS Drivers
                        FT-S5500 Driver(*1)

(*1) Mac OS 9 only
(*2) Mac OS X only

Download new firmware "FT-S5500_V206.sfirm" when the firmware version is older than Ver2.06.

The upgrade has now been completed.