Truepress Jet L350UV+ Series

Specifications

Product name
Truepress Jet L350UV+LM
Truepress Jet L350UV+
Printing system
Piezo single-pass printing
Resolution
600 x 600 dpi
Printing speed
Maximum 19.3 m² (207.8 ft²)/min at 60 m (196.8 ft)/min*1
Printing size
Width: Maximum 322 mm (12.6")
Repeat length: 50.8 mm to 2,400 mm (2" to 94.4")
Media size
Width: 100 mm to 350 mm (4" to 13.7")
Roll diameter: Maximum 750 mm (29.5")
Weight: Maximum 120 kg (264 lb)
Media thickness
0.04 to 0.35 mm (1.6 to 13.7 mil)*2 [when chilled roller installed]
Inks
Truepress ink for L350+LM *3
Truepress ink for L350
Ink tank capacity: 8 liters per color
Ink bottle capacity: 4 liters per color
Output configuration
CMYK + White + Orange
CMYK + White
Printheads
4 step grayscale printheads
Droplet size: Minimum 3 picoliter
Controller (bundled)
Controller for L350
RIP (bundled)
EQUIOS for L350
Options
60 meter upgrade, web cleaner, mark sensors, corona unit,
splice detection sensor, full color variable data processing
MIS connection (CERM)*4
Chilled roller and chiller*5
Nitrogen generator*5
Chilled roller and chiller
Wrinkle reduction roller (when chilled roller not installed)
Dimensions (W x D x H) /
Weight
Printer: 3,701 x 2,065 x 2,005 mm (145.8" x 81.3" x 79") / 3,350 kg (7,370 lb)
Main tank: 890 x 760 x 1,120 mm (35.1" x 30" x 44.1") / 200 kg (506 lb)
Power supply box: 1,327 x 878 x 1,627 mm (52.3" x 34.6" x 64.1") / 580 kg (1,276 lb)
Power requirements
Three phase 200/208/220 V, 3 W, 50/60 Hz, 60 A
Three phase 380/400/415 V, 4 W, 50/60 Hz, 40 A
Earth leakage circuit breaker (200 mA sensed current) must be installed.
Operating environment
Required temperature and relative humidity:
15 to 25˚C (59 to 77°F) / 40 to 70˚C (104 to 158˚F) [no condensation]
Warrantied temperature and relative humidity:
18 to 24˚C (64.4 to 75.2°F) / 40 to 70˚C (104 to 158˚F) [no condensation]
Recommended elevation: less than 1,000 meters above sea level
Incidental utilities
Air-pressure utilities such as compressor
Connection to exhaust duct

*1. This printing speed is supported when the 60 meter option is installed.
*2. Thicknesses of 0.09 to 0.35 mm (3.6 to 13.7 mil) can be used with the standard specifications.
*3. The low migration (LM) inks are only available on the Truepress Jet L350UV+LM model.
*4. This option is not available in all regions.
*5. These options are required for the Truepress Jet L350UV+LM model.

For more information about our products, sales or technical information, please contact directly to our local offices.
go to pagetop