Home > Products > PlateRite 8600N-Z/S/E > Specifications

PlateRite 8600N-Z/S/E

Specifications

  PlateRite 8600N-Z PlateRite 8600N-S PlateRite 8600N-E
Recording system External drum
Light source 64-channel laser diodes 32-channel laser diodes
Plate size Maximum: 1,160 x 940 mm (45.6" x 37"); Minimum: 304 x 370 mm (12.0" x 14.6")
Exposure size Maximum: 1,160 x 924 mm (45.6" x 36.3")*1
Media Thermal plates
Media thickness 0.15 to 0.3 mm (5.9 to 11.8 mil)[0.4 mm (15.7 mil) available as an option]
Resolutions 1,200*2/2,000*2/2,400/2,438/2,540/4,000 dpi 1,200*2/2,400/2,438/2,540 dpi
Repeatability ± 5 microns*3
Productivity*4 23 plates/hr at 2,400 dpi
(1,030 x 800 mm/40.5" x 31.4" plates)
14 plates/hr at 2,400 dpi
(1,030 x 800 mm/40.5" x 31.4" plates)
Interface F-PIF
Plate transport Semi-automatic loading (standard), Fully-automatic loading (optional), Plate transport system (optional)
Punch systems Screen, Heidel, Heidelbach W, Protocol, Komori, and others
Dimensions
(W x D x H)
Main unit: 2,446 x 1,295 x 1,390 mm (96.3" x 51" x 54.8");
Blower unit: 693 x 675 x 550 mm (27.3" x 26.6" x 21.7")
Weight Main unit: 1,150 kg (2,530 lb);
Blower unit: 85 kg (187 lb)
Power requirements Main unit: Single phase 200 V to 240 V, 32A, 4 kW (Approved UL, CSA, Declared CE)
(SA-L, MA-L, AT-T, AT-M, and blower unit are supplied by main unit.)
Environment Recommended: 21 to 25°C (69.8 to 77°F);
Required: 18 to 26°C (64.4 to 78.8°F); Relative humidity: 40 to 70% (no condensation)
Options SA-L8800N, MA-L8800N, feed tray, plate transport system (built-in bridge, AT-T8001R, AT-M8001), various printing press punches,
support for 0.4 mm thickness, optional registration punch (600)*5, signal tower unit.
Supported plates See the list (English), See the list (Chinese)

*1 A 24-mm portion remains unexposed when 12-mm clamps are used. A 16-mm portion remains unexposed when 8-mm clamps are used. Productivity is diff erent when 8-mm clamps are used.
*2 1,200 dpi uses 2,400 dpi double dots. 2,000 dpi uses 4,000 dpi double dots.
*3 Over four consecutive exposures on one plate at 23°C (73.4°F ) and 60% relative humidity.
*4 Productivity may vary depending on the sensitivity of the media.
*5 Required for plates 590 mm (23.3") or wider, but less than 610 mm (24") wide.


AT-M8001 plate transport system specifi cations

Dimensions (W x D x H) 2,150 x 1,655 x 955 mm (84.7" x 65.2" x 37.6")
Weight 180 kg (396 lb)
Power requirements Supplied by main unit
Environment Recommended: 21 to 25°C (69.8 to 77F); Required: 18 to 26°C (64.4 to 78.8F); Relative humidity: 40 to 70% (no condensation)
Options Left-turn transport layout, straight-line transport bridge

Autoloader specifi cations

  SA-L8800N-ZX SA-L8800N MA-L8800N-ZX MA-L8800N
Compatible models PlateRite 8800N-ZX PlateRite 8800N-Z/S/E,
PlateRite 8600N, PlateRite 8300N
PlateRite 8800N-ZX PlateRite 8800N-Z/S/E,
PlateRite 8600N, PlateRite 8300N
Plate transport Fully automated (automatic interleaf paper removal)
Cassette capacity 100 plates 100 plates per cassette
No. of cassettes - Up to 5 cassettes (3 cassettes standard)
Dimensions (W x D x H) 1,758 x 1,806 x 1,280 mm (69.3" x 71.2" x 50.4") 3,213 x 1,806 x 1,280 mm (126.5" x 71.2" x 50.4")
Weight*2 600 kg (1,320 lb) 1,250 kg (2,750 lb)
Power requirements Supplied by main unit
Environment Recommended: 21 to 25°C (69.8 to 77°F);
Required: 18 to 26°C (64.4 to 78.8°F); Relative humidity: 40 to 70% (no condensation)
Standard accessories 1 carrier-type cassette, interleaf paper disposal box Interleaf paper disposal box
Options Additional carrier-type cassettes (with dustproof covers),
304 mm small plate tray
Additional cassettes (with cassette trays and driver motors),
304 mm small plate tray

*1 Cassette capacity may vary with plates that are 0.3 mm (11.8 mil) thick or thicker, or less than 450 mm (17.8") wide.
*2 Not including the weight of the plates.
*3 Required when using plates under 450 mm in width.


For more information about our products, sales or technical information, please contact directly to our local offices.
go to pagetop