PlateRite Ultima 36000/24000

Specifications

PlateRite Ultima 36000

Product name PlateRite Ultima 36000
36000ZX 40000SX 36000SX 36000S
Recording system External drum
Light source 1,024 channel laser diode x 2 512 channel laser diode x 2 1,024 channel laser diode x 1 512 channel laser diode x 1
Plate size Maximum 2,100 x 1,600 mm [82.6" x 62.9"];
Minimum 650 x 550 mm [25.6" x 21.7"]*1
Dual plate support Support for two plates,
maximum 1,060 x 1,600 mm [41.7" x 62.9"] each		 Factory option
Imaging size Maximum 2,100 x 1,585 mm [82.6" x 62.4"]*2
(Leading edge gripper margin: 8 mm [0.32"];
Trailing edge gripper margin: 7 mm [0.28"])
Plate thickness 0.2 to 0.4 mm [7.9 to 15.7 mil]*3
Plate type Thermal plates
Resolutions 1,200*4, 2,400, 2,438, 2,540 dpi
Productivity See productivity chart in pdf brochure
Press punch systems Registration punch
Interface S-PIF
Dimensions*5
(W x D x H)		 Main unit: 3,840 x 2,100 x 1,795 mm
[151.2" x 82.7" x 70.7"]
Weight Main unit: 3,720 kg [8,184 lb] (maximum)
Power requirements Main unit : Single phase 200 to 240 V, 5.2 kW, 35 A
Chiller unit : Single phase 200 to 240 V, 2 kW, 8 A
(Z and ZX models require two chiller units)
Blower unit : Single phase 200 to 240 V, 3 kW, 10 A
Environment Recommended: Temperature 21 to 25°C (69.8°to 77°F); Relative humidity: 50 to 70%
Required: Temperature 18 to 26°C (64.4°to 78.7°F); Relative humidity: 40 to 70%
Standard
accessories		 Manual plate loading table, chiller unit, blower unit, signal tower
Optional
accessories		 Punch systems (various printing press punches), punchless plate handling option, dual plate loading support (S model only), 0.5 mm plate thickness support
MA-L40000, SA-L48000 Skid*6,
SA-L36000 Skid*6, AT-M
Supported plates See the list (English), See the list (Chinese)

*1 A minimum size of 650 x 550 mm is offered as a factory option.
*2 When the punchless plate handling option is used, the leading edge gripper margin is 5 mm and the trailing edge gripper margin is 7 mm.
*3 When the factory option for support of 0.5 mm thick plates is selected, the supported plate thickness is 0.3 to 0.5 mm.
*4 1,200 dpi uses doubled 2,400 dpi dots.
*5 For information on system dimensions, please consult your Screen representative.
*6 There are limits to the sizes of plate this unit can handle.

PlateRite Ultima 24000

Product name PlateRite Ultima 24000
24000ZX 24000Z 24000SX 24000S
Recording system External drum
Light source 1,024 channel laser diode x 2 512 channel laser diode x 2 1,024 channel laser diode x 1 512 channel laser diode x 1
Plate size Maximum 1,750 x 1,400 mm [68.8" x 55.1"];
Minimum 650 x 550 mm [25.6" x 21.7"]*1
Dual plate support Support for two plates,
maximum 1,060 x 1,600 mm [41.7" x 62.9"] each		 Factory option
Imaging size Maximum 1,750 x 1,385 mm [68.8" x 54.5"]*2
(Leading edge gripper margin: 8 mm [0.32"];
Trailing edge gripper margin: 7 mm [0.28"])
Plate thickness 0.2 to 0.4 mm [7.9 to 15.7 mil]*3
Plate type Thermal plates
Resolutions 1,200*4, 2,400, 2,438, 2,540 dpi
Productivity See productivity chart in this brochure
Press punch systems Registration punch
Interface S-PIF
Dimensions*5
(W x D x H)		 Main unit: 3,840 x 2,100 x 1,795 mm
[151.2" x 82.7" x 70.7"]
Weight Main unit: 3,710 kg [8,162 lb] (maximum)
Power requirements Main unit : Single phase 200 to 240 V, 5.2 kW, 35 A
Chiller unit : Single phase 200 to 240 V, 2 kW, 8 A
(Z and ZX models require two chiller units)
Blower unit : Single phase 200 to 240 V, 1 kW, 10 A
Environment Recommended: Temperature 21 to 25°C (69.8°to 77°F); Relative humidity: 50 to 70%
Required: Temperature 18 to 26°C (64.4°to 78.7°F); Relative humidity: 40 to 70%
Standard
accessories		 Manual plate loading table, chiller unit, blower unit, signal tower
Optional
accessories		 Punch systems (various printing press punches), punchless plate handling option, dual plate loading support (S model only), 0.5 mm plate thickness support
MA-L40000, SA-L48000 Skid*6, SA-L36000 Skid AT-M
Supported plates See the list (English), See the list (Chinese)

*1 A minimum size of 650 x 550 mm is offered as a factory option.
*2 When the punchless plate handling option is used, the leading edge gripper margin is 5 mm and the trailing edge gripper margin is 7 mm.
*3 When the factory option for support of 0.5 mm thick plates is selected, the supported plate thickness is 0.3 to 0.5 mm.
*4 1,200 dpi uses doubled 2,400 dpi dots.
*5 For information on system dimensions, please consult your Screen representative.
*6 There are limits to the sizes of plate this unit can handle.

For more information about our products, sales or technical information, please contact directly to our local offices.
go to pagetop