PlateRite Ultima 16000N-Z/S/E

Specifications

PlateRite Ultima 16000N (main unit) specifications

Produtc name
PlateRite Ultima 16000N-Z PlateRite Ultima 16000N-S PlateRite Ultima 16000N-E
Recording system External drum
Light source 1,024 channel laser diode 512 channel laser diode
Plate size Maximum 1,470 x 1,180 mm (57.8" x 46.4"); Minimum 650 x 550 mm (25.6" x 21.7")*1
Imaging size Maximum 1,470 x 1,172 mm [57.8" x 46.1"]
(Leading edge gripper margin: 3 mm [0.12"]*1; Trailing edge gripper margin: 5 mm [0.20"])
Plate type Thermal aluminum plate
Plate thickness 0.2 to 0.4 mm (7.9 to 15.7 mil)*1*2
Resolutions 1,200*3, 2,400, 2,438, 2,540 dpi
Repeatability*4 ±5 μm
Productivity*5 42 plates/hr at 2,400 dpi
(1,448 x 1,143 mm/57.0" x 45.0" plates)
46 plates/hr at 2,400 dpi
(1,030 x 800 mm/40.5" x 31.4" plates)
29 plates/hr at 2,400 dpi
(1,448 x 1,143 mm/57.0" x 45.0" plates)
37 plates/hr at 2,400 dpi
(1,030 x 800 mm/40.5" x 31.4" plates)
17 plates/hr at 2,400 dpi
(1,448 x 1,143 mm/57.0" x 45.0" plates)
20 plates/hr at 2,400 dpi
(1,030 x 800 mm/40.5" x 31.4" plates)
Press punch systems Installation of up to 10 units
Interface Gigabit Ethernet
Dimensions
(W x D x H)
Main unit: 2,740 x 1,772 x 1,511 mm (107.9" x 69.8" x 59.5")
Weight Main unit: 1,640 kg (3,608 lb)
Power requirements Main unit: Single phase 200 to 240 V, 5 kW, 25 A
Chiller unit: Single phase 200 to 240 V, 0.7 kW, 4 A
Blower unit: Single phase 200 to 240 V, 1 kW, 10 A
Main unit: Single phase 200 to 240 V, 5 kW, 25 A
Chiller unit: Single phase 200 to 240 V, 0.6 kW, 3 A
Blower unit: Single phase 200 to 240 V, 1 kW, 10 A
Environment Recommended: Temperature 21 to 25°C (69.8 to 77°F); Relative humidity 50 to 70%
Required: Temperature 18 to 26°C (64.4 to 78.7°F); Relative humidity 40 to 70%
Options Press punch systems (SCREEN, Heidel, Heidelbach W, Protocol, and Komori),
small size option, upgrade to S model*6, air filter unit (AF-180N), signal tower unit

*1. A minimum plate size of 450 x 370 mm and thickness of 0.15 mm (with leading edge gripper margin of 4 mm) are
   offered as an option.
   Plates wider than 590 mm and narrower than 610 mm cannot be used.
*2. With a plate thickness of 0.4 mm, only plate sizes of 900 x 770 mm and above can be used.
*3. 1,200 dpi uses doubled 2,400 dpi dots.
*4. Over four consecutive exposures on one plate at 23°C (73.4°F) and 60% relative humidity.
*5. Productivity may vary depending on the sensitivity of the plates used.
*6. For the PlateRite Ultima 16000N-E only.


Manual plate loading table specifications

Plate transport
Manual loading, manual unloading (requires interleaf paper removal)
Dimensions (W x D x H) 2,740 x 3,130 x 1,511 mm (107.9" x 123.3" x 59.5")
Weight Approx. 1,830 kg [4,026 lb] (including main unit)
Power requirements Supplied by main unit

Semi-automatic specifications (AT-M16000NII)

Plate transport
Manual loading (requires interleaf paper removal), automatic unloading
Dimensions (W x D x H) 3,735 x 4,010 x 1,511 mm (147.1" x 157.9" x 59.5")
Weight Approx. 2,030 kg [4,466 lb] (including main unit)
Power requirements Supplied by main unit

6-cassete autoloader specifications (MA-L16000NII + AT-M16000NII)

Plate transport
Fully-automatic (automatic interleaf paper removal)
Cassette capacity Fully-automatic (automatic interleaf paper removal)
No. of cassettes 6 cassettes (3 cassettes each on both sides)
Dimensions (W x D x H) 6,293 x 5,520 x 1,715 mm (247.8" x 217.4" x 67.6")
Weight Approx. 3,680 kg [8,096 lb] (including main unit and AT-M, not including plates)
Power requirements Supplied by main unit

3-cassete autoloader specifications (MA-L16000NII + AT-M16000NII)

Plate transport
Fully-automatic (automatic interleaf paper removal)
Cassette capacity 75 plates (for 0.3 mm thickness)
No. of cassettes 3 cassettes
Dimensions (W x D x H) 6,293 x 3,995 x 1,715 mm (247.8" x 157.3 x 67.6")
Weight Approx. 3,170 kg [6,974 lb] (including main unit and AT-M, not including plates)
Power requirements Supplied by main unit

One of the specifications listed above must be selected for the PlateRite Ultima 16000N series.

For more information about our products, sales or technical information, please contact directly to our local offices.
go to pagetop