PlateRite Ultima 48000/40000

Specifications

Product name PlateRite Ultima 48000 PlateRite Ultima 40000
48000SX 48000S 40000SX 40000S
Recording system External drum
Light source 1,024 channel laser diode x 1 512 channel laser diode x 1 1,024 channel laser diode x 1 512 channel laser diode x 1
Plate size Maximum 2,900 x 1,350 mm [114.1" x 53.1"];
Minimum 650 x 550 mm [25.6" x 21.7"]
Maximum 2,280 x 1,600 mm [89.7" x 62.9"];
Minimum 650 x 550 mm [25.6" x 21.7"]*1
Dual plate support Support for two plates,
maximum 1,450 x 1,350 mm [57.0" x 53.1"] each
Support for two plates,
maximum 1,060 x 1,600 mm [41.7" x 62.9"] each
Imaging size Maximum 2,900 x 1,335 mm [114.1" x 52.5"]*2
(Leading edge gripper margin: 8 mm [0.32"];
Trailing edge gripper margin: 7 mm [0.28"])
Maximum 2,280 x 1,585 mm [89.7" x 62.4"]*2
(Leading edge gripper margin: 8 mm [0.32"];
Trailing edge gripper margin: 7 mm [0.28"])
Plate thickness 0.3 to 0.4 mm [11.9 to 15.7 mil]*3 0.2 to 0.4 mm [7.9 to 15.7 mil]*3
Plate type Thermal plates
Resolutions 1,200*4, 2,400, 2,438, 2,540 dpi
Productivity See productivity chart in pdf brochure
Press punch systems Registration punch
Interface S-PIF
Dimensions*5
(W x D x H)
Main unit: 4,600 x 2,100 x 1,795 mm
[181.2" x 82.7" x 70.7"]
Main unit: 3,840 x 2,100 x 1,795 mm
[151.2" x 82.7" x 70.7"]
Weight Main unit: 4,000 kg [8,800 lb] (maximum) Main unit: 3,720 kg [8,184 lb] (maximum)
Power requirements Main unit : Single phase 200 to 240 V, 5.2 kW, 32 A
Chiller unit : Single phase 200 to 240 V, 2 kW, 8 A
Blower unit : Single phase 200 to 240 V, 1 kW, 10 A
Main unit : Single phase 200 to 240 V, 5.2 kW, 35 A
Chiller unit : Single phase 200 to 240 V, 2 kW, 8 A
Blower unit : Single phase 200 to 240 V, 1 kW, 10 A
Environment Recommended: Temperature 21 to 25°C (69.8°to 77°F); Relative humidity: 50 to 70%
Required: Temperature 18 to 26°C (64.4°to 78.7°F); Relative humidity: 40 to 70%
Standard
accessories
Manual plate loading table, chiller unit, blower unit, signal tower
Optional
accessories
Punch systems (various printing press punches), punchless plate handling option, 0.5 mm plate thickness support
SA-L48000 Skid, MA-L40000*6, AT-M MA-L40000, SA-L48000 Skid*6, AT-M
Supported plates See the list (English), See the list (Chinese)

*1 A minimum size of 650 x 550 mm is offered as a factory option.
*2 When the punchless plate handling option is used, the leading edge gripper margin is 5 mm and the trailing edge gripper margin is 7 mm.
*3 When the factory option for support of 0.5 mm thick plates is selected, the supported plate thickness is 0.3 to 0.5 mm.
*4 1,200 dpi uses doubled 2,400 dpi dots.
*5 For information on system dimensions, please consult your Screen representative.
*6 There are limits to the sizes of plate this unit can handle.


For more information about our products, sales or technical information, please contact directly to our local offices.
go to pagetop